AeroWorks Extra 260 Manuel d'utilisateur télécharger pdf (Page 7)

Manual Choke Installation

1. Locate the choke bell crank that was assembled

in the previous steps. Install bell crank assembly

onto fuselage floor as shown with one arm fac-

ing forward and the other arm to the top.

2. To help with alignment of block attach the push-

rod to the vertical portion of the bell crank as

shown below.

3. Mark and drill hole for long choke pushrod loca-

tion.

4. Unhook the clevis from the bell crank and install

the long pushrod to the bottom portion of the

bell crank using the pre-bent “Z” bend. Drop

pushrod through hole.

Mark Pushrod Location

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

AeroWorks Extra 260 Manuel d'utilisateur Page 7