AeroWorks Extra 260 Manuel d'utilisateur télécharger pdf (Page 23)

Rudder Installation

1. Gather the rudder, six hinges and epoxy mate-

rials as shown. Use 15-30 minute epoxy to

ensure adequate working and cleanup time.

RUDDER AND TAILWHEEL ASSEMBLY

2. Prep all hinges for installation by applying

Vaseline petroleum jelly or light oil to the

hinge joint. This ensures no epoxy gets into

the hinge during assembly.

3. Mix epoxy in mixing cup and use a tapered

stick to apply the epoxy inside the pre-drilled

holes in the trailing edge of the fin. Apply

epoxy to one side of each hinge and insert the

hinge completely into the hole. Ensure the

hinge axis is vertical and parallel to the trailing

edge of the fin before epoxy cures. Wipe

away excess epoxy with alcohol wetted wipes.

4. Epoxy the hinges into the fin first and allow

epoxy to fully cure.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 74 75

Pas de commentaire

AeroWorks Extra 260 Manuel d'utilisateur Page 23