AeroWorks Extra 260 Manuel d'utilisateur télécharger pdf (Page 66)

1. Gather the switches and mounting hardware to

be used. We used three switches, two for re-

ceiver batteries, and one for ignition battery.

The installation steps are the same for all

switches.

RADIO INSTALLATION

2. Switch location is at the discretion of the

builder. We chose to place the switches to-

ward the front of the fuse on each side. Mark

location for switches using switch template.

3. Use a modeling knife to cut out the switch

holes.

4. Slide switch wires inside fuse through the

switch cutout.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 74 75

Pas de commentaire

AeroWorks Extra 260 Manuel d'utilisateur Page 66