AeroWorks Extra 260 Manuel d'utilisateur télécharger pdf (Page 65)

Fuel Tubing Installation

1. Attach the fuel line to the fuel pick up tube on

the tank as shown.

Note: It is highly recommended you solder a brass

barb to the end of the fuel pick up tube to prevent the

fuel line from coming loose ( brass barb not sup-

plied)

2. Place the fuel tank inside the fuse as shown.

Run the fuel line forward through the firewall

hole toward the engine as shown.

3. Cut the fuel line to the length required to at-

tach to the carburetor fuel intake nipple.

4. Remove the tank and cut the fuel line just for-

ward of the tank stopper as shown for prepara-

tion of installing fuel “ T “.

Note: Fuel “ T “ is not included.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 92 93

Pas de commentaire

AeroWorks Extra 260 Manuel d'utilisateur Page 65