AeroWorks Extra 260 Manuel d'utilisateur télécharger pdf (Page 77)

77

1. Gather the switches and mounting hardware to

be used. We used two switches, one for re-

ceiver battery, and one for ignition battery, and

regulators for lithium ion batteries. The instal-

lation steps are similar for all types of

switches.

RADIO INSTALLATION

2. Switch location is at the discretion of the

builder. We chose to place the switches toward

the front of the fuse on each side. Mark location

for switches using switch back mounting plate as

a template.

Note: Make sure switch does not interfere with

leading edge of wing.

3. Use a modeling knife to cut out the switch

holes.

4. Slide switch wires inside fuse through the

switch cutout.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 92 93

Commentaires sur ces manuels

Pas de commentaire