AeroWorks Extra 260 Manuel d'instructions télécharger pdf (Page 30)

30 Aeroworks 30cc Freestyle Extra 260 Assembly Manual

12. Lightly sand end of pushrod for best bond.

13. Solder the threaded brass coupler to the end of

the throttle pushrod.

14. Attach the throttle pushrod with the 4/40 ball

links and secure. Power up the receiver and

throttle servo and adjust pushrod for proper op-

eration. Ensure the servo or rod does not bind or

jam at closed or full open positions.

Choke Installation

1. Gather provided choke installation items shown

below;

◊ 1 - 4-40 Metal Rod Threaded at One End

◊ 1 - 4-40 Ball Link Assembly with Hardware

◊ 1 - 4-40 Threaded Insert

◊ 1 - Large Nylon Tie

◊ 2 - Small Nylon Ties

3. Location of manual choke pushrod shown be-

low.

2. We recommend installing the carburetor choke

pushrod as shown. Use nylon ties to provide

support and holding friction for the choke push-

rod. Place silicon fuel tubing over the wire

pushrod to prevent damage from vibration and

provide holding friction. Solder a threaded in-

sert on the end of the pushrod to provide a finger

grip.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 54 55

Pas de commentaire

AeroWorks Extra 260 Manuel d'instructions Page 30