AeroWorks Extra 260 Manuel d'instructions télécharger pdf (Page 4)

4 Aeroworks 30cc Freestyle Extra 260 Assembly Manual

HARDWARE NEEDED TO

COMPLETE

Engine Option 1: DLE 30

◊ 1 - DLE 30 Rear Carb w/ 60mm Standoffs

◊ 1 - J’Tec Wrap Around Pitts Muffler

◊ 8 - Fender Washers

◊ 8 - Engine mounting bolts

◊ 1 - 18x8 Propeller

Servo Option 1 : Sport Performance

Hitec 7985MG Servos may be used for sport flying.

If flying more aggressive aerobatics please see

Servo Option Two below.

Note: Servos available through Aeroworks

◊ 5 - Hitec 7985MG Servos for flight surfaces

◊ 1 - Hitec 635HB Servo for throttle

Servo Option 2: Unlimited Performance

Hitec 7954SH Servos are recommended for unlim-

ited flying. These servos will provide the best per-

formance possible.

Note: Servos available through Aeroworks

◊ 5 - Hitec 7954SH Servos for flight surfaces

◊ 1 - Hitec 635HB Servo for throttle

Recommended Spinner:

◊ 1 - 3” Carbon Spinner

Note: Spinner available from Aeroworks

Electronic Accessories : Receiver

A 6 or 8 channel receiver is recommended, using a

receiver with 6-8 channels will allow the builder to

mix both the aileron and elevator servo together in

the radio. Mixing these functions will result in a great

flying, well trimmed airplane.

◊ 1 - 6-8 Channel 2.4 GHz or PCM Receiver

Engine Option 2: DLE 35RA

◊ 1 - DLE 35RA w/ 60mm Standoffs

◊ 1 - Stock DLE 35RA Muffler

◊ 8 - Fender Washers

◊ 8 - Engine mounting bolts

◊ 1 - 19x8 Propeller

1 2 3 4 5 6 7 8 9 ... 54 55

Pas de commentaire

AeroWorks Extra 260 Manuel d'instructions Page 4