AeroWorks Extra 260 Manuel d'instructions télécharger pdf (Page 41)

Aeroworks 30cc Freestyle Extra 260 Assembly Manual 41

2. Mount radio switch in accordance with the

switch manufacturers instructions and hardware.

Note: Ensure switch does not interfere with wing

or cowl installation.

3. Slide (1) One Wrap Strap under radio tray as

shown.

4. Wrap one piece of foam padding to fit under the

battery as shown below.

RADIO INSTALLATION

1. Gather the radio installation items as shown be-

low.

Required Parts

◊ 2 - 8x80x300mm Foam Pad

◊ 2 - 356x12.5mm Velcro Straps

Required Parts -Not Included

◊ 1 - Receiver 6-8 Channel Recommended

◊ 1 - Batteries (2600mah Li-Ion Shown )

◊ 1 - Regulators (Fromeco Sahara Shown )

◊ 1 - Receiver Switch (Smart-Fly Shown )

◊ 1 - Adhesive backed Velcro

Required Tools and Adhesives

◊ Pencil/Felt Tip Pen

◊ Electric Drill

◊ 1/16” Drill Bit

◊ Wire Cutter

◊ Masking Tape

5. Install battery using foam padding and securely

tighten one wrap strap as shown.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 54 55

Pas de commentaire

AeroWorks Extra 260 Manuel d'instructions Page 41